Imperial Building Supplies Store in Ontario | Yvon https://www.yvonbuildingsupply.ca Mon, 03 Jun 2024 14:17:08 +0000 en-CA hourly 1 https://wordpress.org/?v=6.9.4 https://www.yvonbuildingsupply.ca/wp-content/uploads/2022/03/image_2022_03_17T15_38_27_249Z-150x150.png Imperial Building Supplies Store in Ontario | Yvon https://www.yvonbuildingsupply.ca 32 32 5/8″ x 10′ L-Trim D200 https://www.yvonbuildingsupply.ca/product/5-8-x-10-l-trim-d200/ Wed, 23 Mar 2022 05:56:38 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17239 This drywall trim provides a neat finish and solid protection to the gypsum wallboard at window and door jambs where wood trim is omitted. Holes in the flange provide a "key" for the joint cement.

The post 5/8″ x 10′ L-Trim D200 first appeared on Yvon Building Supply.

]]> L trims serve to protect sides of Gypsum panel around door and windows when no moulding is installed.

The post 5/8″ x 10′ L-Trim D200 first appeared on Yvon Building Supply.

]]> 1/2″ x 10′ Reveal Trim D300 https://www.yvonbuildingsupply.ca/product/1-2-x-10-reveal-trim-d300/ Wed, 23 Mar 2022 05:56:38 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17240 This drywall Reveal trim is zinc-coated increasing its life span. Use the D300 drywall trim with the knurled surface to improve its performance and usability.

The post 1/2″ x 10′ Reveal Trim D300 first appeared on Yvon Building Supply.

]]>
  • Add a clean, crisp finish to your DIY home improvement project with drywall metal trim.
  • It has an actual length of 10 ft and a width of 5/8 in.

    • The post 1/2″ x 10′ Reveal Trim D300 first appeared on Yvon Building Supply.

    ]]>         5/8″ x 10′ Reveal Trim D300 https://www.yvonbuildingsupply.ca/product/5-8-x-10-reveal-trim-d300/ Wed, 23 Mar 2022 05:56:38 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17241 This drywall Reveal trim is zinc-coated increasing its life span. Use the D300 drywall trim with the knurled surface to improve its performance and usability.

    The post 5/8″ x 10′ Reveal Trim D300 first appeared on Yvon Building Supply.

    ]]>
  • Add a clean, crisp finish to your DIY home improvement project with drywall metal trim.
  • It has an actual length of 10 ft and a width of 5/8 in.

    • The post 5/8″ x 10′ Reveal Trim D300 first appeared on Yvon Building Supply.

    ]]>         1/2″ x 10′ J-Mould D400 https://www.yvonbuildingsupply.ca/product/1-2-x-10-j-mould-d400/ https://www.yvonbuildingsupply.ca/product/1-2-x-10-j-mould-d400/#respond Wed, 23 Mar 2022 05:56:38 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17242 Provides edge protection at window and door openings, and where wallboard butts against concrete or other materials.

    The post 1/2″ x 10′ J-Mould D400 first appeared on Yvon Building Supply.

    ]]>
  • For use with 1/2 wallboard/drywall
  • Finishing cement is optional
  • Stud edge protection
  • Galvanized

    • The post 1/2″ x 10′ J-Mould D400 first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/1-2-x-10-j-mould-d400/feed/ 0     7/8″ Furring Channel 25ga .018 12′ https://www.yvonbuildingsupply.ca/product/7-8-furring-channel-25ga-018-12/ https://www.yvonbuildingsupply.ca/product/7-8-furring-channel-25ga-018-12/#respond Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17225 Drywall furring channel is a very versatile hat-shaped metal channel designed for furring out any surface for application of final finish.

    The post 7/8″ Furring Channel 25ga .018 12′ first appeared on Yvon Building Supply.

    ]]>     All light gauge product have minimum coating of G40.33 and 43mils product have G60 coating or better
  • steel profile, thickness and dimensions – ASTM C645
  • Steel Grade – ASTM A 1003
  • Coating (Galvanization) ASTM – A653

    • The post 7/8″ Furring Channel 25ga .018 12′ first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/7-8-furring-channel-25ga-018-12/feed/ 0     Resilient Channel 25ga .018 12′ https://www.yvonbuildingsupply.ca/product/resilient-channel-25ga-018-12/ https://www.yvonbuildingsupply.ca/product/resilient-channel-25ga-018-12/#respond Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17226 Resilient Channel dampens sound waves effectively, dissipating the energy and reducing sound transmission by suspending the drywall inch from the wall stud or floor joist.

    The post Resilient Channel 25ga .018 12′ first appeared on Yvon Building Supply.

    ]]>
  • They are an economical means of reducing noise transmission for wood or metal structural or load bearing partitions. Minimum coating for this product is G40
  • steel profile, thickness and dimensions – ASTM C645
  • Steel Grade – ASTM A 1003
  • Coating (Galvanization) ASTM – A653

    • The post Resilient Channel 25ga .018 12′ first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/resilient-channel-25ga-018-12/feed/ 0     1-1/4″ Cornerbead 90deg https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-90deg/ https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-90deg/#respond Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17227 This drywall corner bead, manufactured using sturdy zinc-coated steel, is used to provide a high-quality finish and solid protection to corners. This traditional drywall finishing product can be applied either with nails, screws or clinch-on tools.

    The post 1-1/4″ Cornerbead 90deg first appeared on Yvon Building Supply.

    ]]>
  • All cornerbeads conforms to Canadian steel standards. They are available in standard 7′, 8′, 9′, 10′ and 12′ length (90 deg and 130 deg).
  • Superior compound adhesion
  • Easy installation
  • Installation is completed with joint compound for a smooth ready-to-paint surface

    • The post 1-1/4″ Cornerbead 90deg first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-90deg/feed/ 0     1-1/4″ Cornerbead 130deg https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-130deg/ https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-130deg/#respond Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17233 This drywall corner bead, manufactured using sturdy zinc-coated steel, is used to provide a high-quality finish and solid protection to corners. This traditional drywall finishing product can be applied either with nails, screws or clinch-on tools.

    The post 1-1/4″ Cornerbead 130deg first appeared on Yvon Building Supply.

    ]]>
  • All cornerbeads conforms to Canadian steel standards. They are available in standard 8′, 9′, 10′, and 12′ length(90 deg and 130 deg).
  • Superior compound adhesion
  • Easy installation
  • Installation is completed with joint compound for a smooth ready-to-paint surface

    • The post 1-1/4″ Cornerbead 130deg first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/1-1-4-cornerbead-130deg/feed/ 0     1/2″ x 10′ L-Trim D200 https://www.yvonbuildingsupply.ca/product/1-2-x-10-l-trim-d200/ Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17238 This drywall trim provides a neat finish and solid protection to the gypsum wallboard at window and door jambs where wood trim is omitted. Holes in the flange provide a "key" for the joint cement.

    The post 1/2″ x 10′ L-Trim D200 first appeared on Yvon Building Supply.

    ]]>     L trims serve to protect sides of Gypsum panel around door and windows when no moulding is installed.

    The post 1/2″ x 10′ L-Trim D200 first appeared on Yvon Building Supply.

    ]]>         1-1/2″ X 1/2″ Carrying Channel 12′ https://www.yvonbuildingsupply.ca/product/1-1-2-x-1-2-carrying-channel-12/ https://www.yvonbuildingsupply.ca/product/1-1-2-x-1-2-carrying-channel-12/#respond Wed, 23 Mar 2022 05:56:37 +0000 https://yvonbuildingsupply.wysework.net/?post_type=product&p=17224 Our carrying channels are used in bracing or bridging applications or in suspended drywall ceiling.

    The post 1-1/2″ X 1/2″ Carrying Channel 12′ first appeared on Yvon Building Supply.

    ]]>
  • steel profile, thickness and dimensions – ASTM C645
  • Steel Grade – ASTM A 1003
  • Coating (Galvanization) ASTM – A653

    • The post 1-1/2″ X 1/2″ Carrying Channel 12′ first appeared on Yvon Building Supply.

    ]]>     https://www.yvonbuildingsupply.ca/product/1-1-2-x-1-2-carrying-channel-12/feed/ 0